Oce TCS500 - Use Océ Queue Manager

93
Introduction to the Océ Queue Manager
Use the Océ Queue Manager to control
your workflow
Introduction to the Océ Queue Manager
Definition
This chapter describes how to view and manage the jobs with the Océ Queue
Manager.
You can access the Océ Queue Manager locally on the controller if you have a
keyboard, mouse and monitor with your Océ Power Logic
®
controller.You must use
Océ Remote Logic
®
to connect to the Océ Queue Manager when you do not have a
keyboard, mouse and monitor with your Océ Power Logic
®
controller.
(see ‘Introduction to the Océ Settings Editor’ on page 74) for information about how
to start the application locally on the controller. (see ‘Start the Océ Power Logic®
controller applications’ on page 73).
(see ‘Start the applications with Océ Remote Logic®’ on page 117) for information
about how to start the application from a remote workstation .
Description of the Océ Queue Manager
The Océ Queue Manager application provides you with a graphical image of the
print queue, the history queue or the inbox queue
The Océ Queue Manager allows you to do the following.
■ View the queue of jobs.
■ Cancel the current job.
■ Delete jobs in the queue.
■ Place jobs on hold in the queue.
■ Print jobs from the history queue.
■ Print jobs from the inbox queue.
■ Move jobs to the top of the queue.
■ Give priority to jobs in the queue.
■ Restart the jobs that were placed on hold in the queue.
■ Change the attributes of a job.
User modes
The Océ Queue Manager has the following user modes.
■ The key operator mode
■ The repro operator mode
■ The system administrator mode
■ The service operator mode.