Oce TCS500 - Log On to Océ License Logic

228 Chapter 10 License management with Océ License Logic
Log on to Océ License Logic
Log on to Océ License Logic
Introduction
You can run Océ License Logic on the controller of the Océ system or remote
through a web browser. Access to Océ License Logic is password protected. Use the
same System Administrator password as you use on the Océ system to log on.
Purpose
Log on to Océ License Logic for the following purposes.
■ View the current active licenses
■ Get the host id of the Océ system
■ Save the current active licenses
■ Perform a license activation job.
You can activate new licenses or saved licenses.
Before you begin
To run Océ License Logic remote, you need the host name or IP address of the Océ
system.
How to log on to Océ License Logic on the Océ Power Logic
®
controller
1. Open the Océ Settings Editor
2. Click 'Edit' in the menu bar
3. Click 'Licenses...'
The logon window opens.
4. Select 'System administrator'
5. Enter the 'Password'
6. Click the 'Logon' button.
How to log on to Océ License Logic from a remote web browser
1. Open the web browser.
Océ License logic supports Microsoft
®
Internet Explorer
®
version 5.5 or higher.
2. Enter the following URL in your browser: http://'printer-name'/LicenseLogic.html
Note: 'Printer-name' is the host name or IP address of the printer.
The logon window opens.
3. Select 'System administrator'
4. Enter the 'Password'
5. Click the 'Logon' button.