Oce TCS500 - How to Use This Manual

13
How to use this manual
How to use this manual
Introduction
You can access a topic quickly through the following methods.
■ Refer to the alphabetical index at the end of the manual.
■ Refer to the table of contents at the beginning of this manual.
Before you turn to the complete table of contents, you can also use the following
table to find a topic quickly.
The sections of this manual
The following table gives an overview of how the chapters are arranged logically.
[1]
Chapters Section Topics
1 Introduction
■ Explanation of the product concept
■ The main components of the Océ
TCS500
■ Overview of available
documentation
2 Get to know the system
■ Scanner
■ Controller
■ Printer
■ Finishing options
3 Prepare the system for
use
■ Turn the system on and off
■ Define the time-outs
■ Set the system language
■ Configure the network settings
4 Use the PLC applications
to control your workflow
■ Océ Settings Editor
■ Océ System Control Panel
■ Océ Queue Manager
■ Océ Scan Manager
■ Océ Remote Logic®
5-6-7 Use the system
■ Scan-to-file jobs
■ Print jobs
■ Copy jobs
8 Ensure the best quality
output
■ Define the output quality
■ Check the output quality
■ Optimize the output quality