Oce TCS500 - The Océ TCS500 Printer Error Handling

264 Chapter 12 System messages and solutions
Overview
The Océ TCS500 printer
Overview
Definition
This table gives an overview of the possible error messages and system messages of
the Océ TCS500 printer and refers to the possible solution.
[88]
Error message / System
message
Description / solution
'Required media not available' The media required for the job is not available on
the printer.
(see ‘Required media not available’ on
page 266)
'Roll empty' The end of the roll of media is reached while you
print
(see ‘End of roll’ on page 266)
'Close maintenance door' /
'Close top cover.'
A door or cover is open, although you are not in
a wizard
(see ‘Cover or door opened’ on page 267)
'Remove media' A media jam occurred
(see ‘Remove jammed media’ on page 268)
'Temperature out of range'
/'Humidity out of range'
Excessive temperature or humidity.
(see ‘Temperature or humidity out of range’ on
page 269)
'Warning Carriage away from
home position too long'
The carriage is away from its home position too
long
(see ‘Carriage away from home position too
long’ on page 270)
? The Océ Queue Manager contains damaged jobs
that you cannot delete.
(see ‘Clear the set memory’ on page 271)
'System error' A system error occurred.
(see ‘Correct system errors’ on page 271)
'Permanent error' A permanent error occurred.
(see ‘Deal with permanent errors’ on page 272)