225
The basic workflow of license activation
The basic workflow of license activation
Introduction
Before you can use the possibilities of Océ License Logic, you must log on to Océ
License Logic. The following workflow describes per step when to use which
possibility.
The workflow
1. Select the new options you need.
Use the following possibilities of Océ License Logic to do so.
■ View the current active licenses
You can make a list of new options you need and make a list of license numbers.
Océ needs the list of new options and the license numbers to create a new license
file.
■ Get the host id of the Océ system.
Océ needs the host id of your Océ system to create a new license file.
2. Send the list of new options you need, the list of license numbers and the host id to
Océ.
Océ creates and delivers one or more new license files.
3. Create a back-up of the current active licenses if necessary.
Use the following possibility of Océ License Logic to do so.
■ Save the current active licenses
4. Activate the licenses.
Use the following possibility of Océ License Logic to do so.
■ Perform a license activation job.
The license activation job guides you through the following steps.
1. Locate the license file
2. Preview the new active licenses
3. Accept the end user license agreement
4. Finish the license activation job
5. Restart the controller of the Océ system.
Note: Perform the license activation job for each license file.
To Next Page
Loading...
