Oce TCS500 - Typical Drying Times

286 Appendix A Specifications of the Océ TCS500
Typical drying times
Typical drying times
Introduction
The printer automatically adapts the default drying time. The default drying time
depends on the following.
■ The media type
■ The ambient humidity
■ The print mode.
If you print grayscale in the 'Check' quality mode, the system decreases the
drying time to 20% of the default value.
You can change the drying time for all the media types. You can select a percentage
of 0% - 999% of the default drying time (see ‘Change the default drying time’ on
page 151).
Typical drying times per media type
The following table describes typical drying times for Océ media under standard
conditions (22 °C, 50% relative humidity).