19
The Océ TCS500 users
The Océ TCS500 users
Introduction
The Océ TCS500 has the following types of users.
■ Common user
■ Repro operator
■ Key operator
■ System administrator.
Note: (see ‘User modes’ on page 121) for or more information about the user
modes and how to log on as a specific type of user.
Common user
The common user is a person who uses the system for print jobs. The common user
has no permission to change the system settings. Therefore, the common user is
referred to as an anonymous user. In order to be consistent with the Océ Power
Logic
®
controller software, in this manual the common user is referred to as an
anonymous user.
Note: You do not need a password if you are a common user or an anonymous user
Repro operator
The repro operator is responsible for the daily use of the Océ TCS500 in a central
repro department. The repro operator has no permission to change the settings in the
Océ Settings Editor.
The repro operator has full permission in the Océ Queue Manager.
Note: The default password for the repro operator is ReproOp.
Key operator
The key operator is responsible for the user maintenance and the system settings of
the Océ TCS500.
The key operator has the permission to define the key operator settings in the Océ
Settings Editor.
To Next Page
Loading...
