Oce TCS500 - Output Type, Quality, and Print Speed

188 Chapter 8 Ensure the best output quality
Output type, output quality and print speed
Output type, output quality and print speed
Introduction
The type of your printed output depends on the following parameter.
■ The color mode ('Grayscale' / 'Color'
The quality of your printed output depends on the following parameters.
■ The media type
■ The quality mode
■ The print speed
The lower the print speed, the better the output quality.
The following table describes the relation between these parameters.
The relation between the output type and the quality parameters
[69]
[69] The relation between the output quality parameters
Color mode Quality mode Print speed for all media
(per E, not including the
drying time and the
processing time)
(minutes' seconds")
'Grayscale' 'Check' 0'41"
'Release' Between 1'00" and 3'40",
dependent on file content
(the printer automatically
optimizes between print
quality and productivity.
'Presentation' 3'40"
'Color' 'Check' 1'03"
'Release' Between 3'05" and 6'15",
dependent on file content
(the printer automatically
optimizes between print
quality and productivity.
'Presentation' 9'15"