151
Change the default drying time
Change the default drying time
Introduction
You can change the drying time with a percentage of the default drying time. For
example, if you set the default drying time for Premium coated paper, under the
conditions used in the table above, to 200%, the drying time will be 0'40".
How to change the default drying time
1. Open the Océ Settings Editor application.
2. Go to the setting Key Operator - Printer - Media - Drying time correction.
3. Select the required media type.
4. Define the required percentage.
5. Press 'Apply'
Note: See (see ‘Typical drying times’ on page 286) to get an overview of the typical
drying times per media type.
To Next Page
Loading...
