Oce TCS500 - Manage Scanned Files

108 Chapter 4 Use the PLC applications to control your workflow
Manage the scanned files
Manage the scanned files
Introduction
The right-hand pane of the destination area displays information about the scanned
files.
You can do the following to manage the scanned files.
■ View a scanned file'Auto view'
If enabled, Océ View Station LT starts automatically to display the scanned file
when the scan to file is complete.
■ Print a scanned file
■ Delete a scanned file
■ View the properties of a scanned file.
View a scanned file
1. Select a file.
2. From the 'File' menu, select 'View'.
You can also click the 'View' button on the toolbar.
[75]
[75] The View button on the toolbar
Océ View Station LT starts and displays the file
Enable Auto view
1. From the 'System' menu, select 'Auto view'.
A check mark in the menu in front of 'Auto view' indicates that 'Auto view' is
enabled.
Print a scanned file
1. Select a file.
2. From the 'File' menu, select 'Print'.
You can also click the 'Print' button on the toolbar.
[76]
[76] The Print button on the toolbar
The system prints the selected file with the default settings defined in the Océ
Settings Editor.