Oce TCS500 - Manage Destinations

106 Chapter 4 Use the PLC applications to control your workflow
Manage destinations
Manage destinations
Introduction
You can do the following to manage the destinations.
■ Lock a destination.
■ Unlock a destination
■ Delete a destination
■ Change the destination properties.
Purpose
If you lock a destination, an anonymous user cannot change the destination
properties.
Lock or unlock a destination
1. Select a destination.
2. From the 'File' menu, select 'Properties'.
You can also click the 'Properties' button on the toolbar.
3. Check the 'Locked' check box.
Uncheck the 'Locked' check box to unlock the destination.
4. Click 'OK' to accept the destination properties
Delete a destination
1. Log on to the key operator mode or the repro operator mode.
2. Select a destination.
3. From the 'File' menu, select 'Delete'.
You can also click the 'Delete' button on the toolbar.
The selected destination is deleted.
Note: You cannot delete the last destination.