Oce TCS500 - Define Settings in Océ Settings Editor

81
Define the settings in the Océ Settings Editor
Define the settings in the Océ Settings Editor
Introduction
The Océ Settings Editor allows you to define the following settings.
■ 'Key Operator settings'
■ 'System Administrator settings'
You need a password to change the 'Key Operator settings' and 'System
Administrator settings'(see ‘Log on to the controller applications’ on page 121).
Note: Only one key operator, system administrator or anonymous user (repro
operator) at a time is authorized to change the settings. An error message appears
when a second user tries to log on to the key operator mode or system administrator
mode. Multiple users are authorized to view the settings.
How to define the key operator settings
1. Log on to the key operator mode.
2. Use the buttons on the left toolbar to display the required group of settings.
3. Select the required settings in the tree structure.
4. Define the settings in the update area.
5. Click the 'Apply' button to confirm the new settings.
6. Log off from the key operator mode to prevent unauthorized use of the application.
How to define the system administrator settings
1. Log on to the system administrator mode.
2. Use the buttons on the left toolbar to display the required group of settings.
3. Select the required settings in the tree structure.
4. Define the settings in the update area.
5. Click the 'Apply' button to confirm the new settings.
6. Log off from the system administrator mode to prevent unauthorized use of the
application.