Oce TCS500 - Start Océ Power Logic Controller Applications

73
Start the Océ Power Logic® controller applications
Start the Océ Power Logic® controller applications
Introduction
You can start the Océ Power Logic® controller applications locally on the controller
or from a remote workstation. This section describes how to start the applications
locally on the Océ Power Logic® controller. The section 'Start the applications with
Océ Remote Logic®' describes how to start the applications from a remote
workstation (see ‘Start the applications with Océ Remote Logic®’ on page 117).
Start the applications locally on the Océ Power Logic® Controller
1. Select the 'Launcher' application.
2. Select the required application.
The application starts with your default system.