105
Create destinations
Create an internet destination with FTP
1. Create a home directory and a subdirectory on a workstation. For example
c:Ftp/Scan
2. Enable FTP on the workstation.
3. From the 'File' menu on the Océ Scan Manager, select 'New'.
You can also click the 'New' button on the toolbar.
The 'Destination properties' dialog box opens.
4. From the 'Type' drop-down list box, select 'FTP'.
5. Enter the system name of the workstation where you created the shared folder in the
'System' text box.
Note: Find the system name of the workstation on the control panel of the
workstation (Control panel - Network - Identification - System name)
6. Enter a path of the target folder in the 'Path' text box.
The path name is the name of the destination folder on the workstation.
7. A user name and password is defined on the FTP server that runs on the workstation
to access to the directory on the workstation through FTP. Enter this user name and
this password in the required fields on the Destination Properties dialog box of the
Océ Scan Manager.
Note: Make sure the user has write-access privileges on the destination.
8. Define the required file naming properties.
9. Click 'OK'.
Océ Scan Manager connects to the new FTP destination. Océ Scan Manager then
shows the contents of the new FTP destination.
To Next Page
Loading...
