18 Chapter 1 Introduction
The product concept and complete workflow
Different jobs
The arrows in the illustration show the different possible jobs (see figure 1 on
page 17). The complete document workflow of the Océ solution includes the
following different jobs.
■ Print job.
A print job starts with a file (4) and ends with a print (3).
■ Copy job.
A copy job starts with an original (1) and ends with a copy (2).
■ Scan-to-file job.
A scan-to-file job starts with an original (1) and ends with a file (4).
■ Set-up and control the complete workflow.
Do which job where
Use the following products to do the following jobs.
■ Print jobs on the job submission software or printer drivers.
■ Copy jobs on the scanner operator panel
■ Scan-to-file jobs on the scanner operator panel
■ Set up and control the complete workflow on the controller.
Note: A setting in the job submission software or driver always overrules a system
setting.
To Next Page
Loading...
