162 Chapter 7 Use the Océ TCS500 for copy jobs
Use the scanner operator panel
Define job settings with the scroll wheel and scroll-wheel key only
1. Select 'Copy' or 'Scan-to-file' with the upper-left softkey.
The five job templates appear.
2. Focus on a job template with the scroll wheel.
A small diamond in front of a template indicates the focus of the scroll wheel.
3. Select a job template with the scroll-wheel key.
The top 5 settings appear.
4. Find a setting with the scroll wheel.
A small rectangle in front of a setting name indicates the focus of the scroll wheel.
5. Select the setting with the scroll-wheel key.
There are several types of settings. The behavior of the scanner operator panel and
the definition of a setting depends on the type of setting you selected. You can select
one of the following types of settings.
■ A setting that contains two values only, like 'On' or ' Off'.
Change the value of the setting with the scroll-wheel key to change the value of
the setting. The value and icon changes.
■ A setting that contains a list of values, like 'Lighter/darker'.
Open the setting with the scroll-wheel key.
Define the required value with the scroll wheel. The value and icon changes.
Close the setting with the scroll-wheel key.
■ A setting that contains a list of settings, like 'Media'.
Focus on a setting with the scroll wheel. The bold text of a value indicates the
focus of the scroll wheel. The icon changes.
Open the setting with the scroll-wheel key. The list of values appears.
Open the setting with the scroll-wheel key.
Define the required value with the scroll wheel. The value and icon changes.
Close the setting with the scroll-wheel key.
Note: You can enter a numeric value with the numeric keys. To enter a negative
numeric value, scroll to a negative value first and than enter the value with the
numeric keys.
6. Select 'Close' with the lower-scroll-wheel key.
7. Repeat from step 4 to define the next setting.
Note: Use the 'Defaults' option at the lower-left key to set all settings of the job
template to default.
To Next Page
Loading...
