Oce TCS500 - Page 177

177
Make multiple sets of copies
How to make multiple sets of copies sorted by page
1. Feed the first original face down and right aligned.
The scanner takes the original.
2. Define the job settings.
■ Select 'Copy' with the upper-left softkey.
The copy job templates appear.
■ Open a copy job template with a left softkey.
The 'Create set' option appears at the upper-right corner of the screen.
■ Select 'Create set' with the upper-right softkey.
The 'Cancel set' option appears at the upper-left corner of the screen. The 'Close
set' option appears at the upper-right corner of the screen.
■ Scroll to 'Collate' and define 'By page' with the left softkey. This setting is
disabled after you press the green start key for the first time.
■ Scroll to another setting if necessary, select the setting with the left softkey and
define the value with the scroll wheel.
■ Define the number of copies for the first original if necessary and press the green
start key.
■ Feed the next original, define the enabled settings and the number of copies for
this original if necessary and press the green start key.
Repeat this step until all originals are fed.
3. Select 'Close set' with the upper-right softkey.
Result
The Océ TCS500 copies a set of originals sorted by set or by page.