Oce TCS500 - Page 211

211
Optimize the output quality on the printer
The print contains
regular horizontal
light or dark bands
'Demo print'
■ The media type defined on the
printer must be the same as media
roll available on the printer. When
the media type defined on the printer
is not the same as the media
available on the printer, use the
'Change media type' wizard to
change the media type
■ Use the 'Presentation' quality mode
■ Use the 'Optimize print quality'
wizard to correct the problem.
Color consistency
problems
N/A
■ Some types of media can discolor
with age. Check that the media is
new and that is stored correctly.
■ Remove the printer from areas of
high humidity.
[84] Problem analysis and solutions (4 – 4)
Problem Method of
analysis
Solutions