Oce TCS500 - Page 34

34 Chapter 2 Get to know the Océ TCS500 color printing system hardware
The printer operator panel
The keys and their functions
[11]
[11] The keys and their functions (1 – 2)
Number Component Function
1 The upper softkeys The function of a softkey depends on the mode
of the printer operator panel. (see ‘The on-line
mode and the off-line mode’ on page 36)
Use the upper softkeys to do the following
■ Scroll through the information tabs on the
on-line screen
■ Scroll through the wizard cards on the
off-line screen
■ Step through the wizards on the off-line
screen.
2 The red attention
LEDs
When operator action is required, the red
LEDs illuminate and you will hear an audio
signal.
The printer has the following types of signals.
■ An attention signal
A short interrupted audio signal. The red
LEDs flash two times.
■ A warning signal
A short interrupted audio signal. The red
LEDs remain illuminated.
■ An error signal
A long, uninterrupted audio signal. The
LEDs flash continuously.
Note: Chapter 12 System
messages and solutions describes
how to correct possible errors.
3 The screen The screen of the printer operator panel
displays different types of information. The
type of information depends on the mode of
the system.
When the printer is in the on-line mode, the
screen displays general system information
and job information.
When the printer is in the off-line mode, the
screen displays various wizards for user action
(see ‘The on-line mode and the off-line mode’
on page 36).