87
Save, load and print the settings
How to load the settings from a file
1. From the 'File' menu, select 'Open'.
You can also click the 'Open' button on the toolbar.
The screen displays a dialog box from where you can browse to the required file.
2. Click the 'Apply' button.
The settings are transferred to the system.
When you are logged on as a Key Operator, the system only loads the Key Operator
settings.
When you are logged on as a System Administrator, the system only loads the
System Administrator settings.
Repro operators and anonymous users are not authorized to load the settings from a
file.
How to print a list of the current settings
1. From the 'System' menu in the Océ System Control Panel, select 'Print settings'.
A list of the current settings on the Océ Power Logic
®
controller is printed.
To Next Page
Loading...
