Changing settings from the operator panel
- 108 -
Item
Factory
default
Description
Silent Mode On Specifies the printing preparations when the
standby mode is switched from the sleep
mode.
[On]: Silent due to no preparation for
printing.
[Off]: The image drum makes a noise as it
prepares for printing, facilitating a faster
speed for the first printing start time.
Clearable Warning ONLINE Sets the timing to clear the recoverable
Auto Continue Off Sets whether or not to automatically restore
this machine when a memory overflow or
Manual Timeout 60 seconds Sets the waiting time for loading the paper
when you print with [Feed paper individually]
checked in the printer driver.
Value range: Off, 30 seconds, 60 seconds
Timeout Injob 40 seconds Sets the time from loss of the data receipt
(canceled by PostScript) until force-printing.
Value range: Off, 5 seconds, 10 seconds,
20 seconds, 30 seconds, 40 seconds, 50
seconds, 60 seconds, 90 seconds, 120
seconds, 150 seconds, 180 seconds, 210
seconds, 240 seconds, 270 seconds, 300
Timeout Local 40 seconds Sets the time to keep each port open after
printing. (Except for network)
The value range is from 0 to 300 seconds in
Timeout Network 90 seconds Sets the time to keep the network port open
after printing.
The value range is from 0 to 300 seconds in
Low Toner Continue Sets the action of this machine when [Toner
Low] is displayed.
This machine goes offline when [Stop] is
Print Mode w/o Color Toner Alarm Specifies the action when there is an empty
color toner cartridge.
[Alarm]: This machine stops without printing
the color print data.
Replace the empty toner cartridge with a
new one.
[Cancel]: Cancels color print data
automatically.
Replace the empty toner cartridge with a
Jam Recovery On Sets whether to reprint pages not printed
due to a paper jam after the paper jam is
cleared.
When [Off] is selected, the printing process
including pages missed due to the paper
To Next Page
Loading...
