Oki C650 - Page 124

Changing settings from the operator panel
- 124 -
Item
Factory
default
settings
Description
Flash
Memory
Setup
Initialize
Execute
Initializes the flash memory.
Format Partition PCL Formats the specified partition of a flash
memory.
Job Log
Setup
Save Job Log
Disable
Sets whether to save a log of print data.
Clear Job Log Execute Clears the log of saved print data.
Displayed when [Save Job Log] is enabled.
Security
Setup
Access Control
Disable
Sets whether to enable access control.
User Counter Report Execute Prints a user counter report. Displayed
when access control is set to [Enable] and
[Save Job Log] is enabled.
Language
Setup
Select Language English Selects the display language of the display.
Job Cancel
Setup
Cancel Key Behavior Short Sets the actions when the cancel button is
pressed.
Short: A short press (for 2 seconds or less)
cancels the printing.
Long: A long press for 2 to 5 seconds
cancels the printing.
Off: Pressing the cancel button does not
cancel the printing.
Inquiry Display On Sets whether to display a screen to confirm
whether to cancel the printing.
Focus Position Yes Sets whether to select [Yes] or [No] as the
default on the job cancel inquiry screen.
Display Timeout 180 Sets the waiting time in seconds before a
button is pressed on the job cancel inquiry
screen. When the waiting time has passed,
the printing will be continued instead of
being canceled.
Near Life
Setup
Drum Near Life Timing 1500 Sets whether to display the number of
copies before the image drum is
approaching the end of its service life.
Value range: 500 to 5,000 (in increments of
500)
Fuser Near Life Timing 1500 Sets whether to display the number of
copies before the fuser unit is approaching
the end of its service life.
Value range: 500 to 5,000 (in increments of
500)
Belt Near Life Timing 1500 Sets whether to display the number of
copies before the belt unit is approaching
the end of its service life.
Value range: 500 to 5,000 (in increments of
500)
Erase Privacy Data Execute Erases the following data set in this
machine.
• Admin password, values set in various
menus
• Various records
• Access control registered to this machine,
user information
NFC Setup
Enable
Enables/Disables the NFC function.