Changing settings from the operator panel
- 125 -
Item
Factory
default
Description
Settings Reset Settings Execute Resets the menu settings changed by the
user to the factory default settings.
Save Settings Execute Saves the current menu settings. Menu
settings that have been saved previously
Restore Settings Execute Restores settings to the saved menu
Change
Password
Input a new admin password.
Verify Password - Input the new admin password again to
*1 Factory default setting values are different according to the country or region.
Print Statistics
Item
Factory
default
Description
Enter Password **** Input the password required to enter the Print Statistics
menu.
The input range is a 4-digit number.
The factory default setting is "0000".
Enables/Disables the usage report.
Maintenance Counter Disable Sets whether or not to add a maintenance report (non-
resettable counter and non-resettable consumables
replacement times) to [Usage Report].
[Disable]: Prints the resettable counter and resettable
consumable replacement counter in [Usage Report].
[Enable]: In addition to resettable counter and resettable
consumable replacement counter, the maintenance report
(non-resettable counter and non-resettable consumable
replacement counter) is also printed together in [Usage
Report].
Displayed when [Print Statistics] - [Usage Report] is set to
Reset Main Counter Execute Resets the main counter.
Displayed when [Print Statistics] - [Usage Report] is set to
Reset Supplies Counter Execute Resets the replacement counter of consumables.
Maintenance counter is not reset.
Displayed when [Print Statistics] - [Usage Report] is set to
[Enable] and [Maintenance Counter] is set to [Enable].
Change Password New Password **** Sets a new password required to enter the Print Statistics
menu.
The input range is a 4-digit number.
Displayed when [Print Statistics] - [Usage Report] is set to
Verify Password **** Input the new password required to enter the Print
Statistics menu set in [New Password] again.
To Next Page
Loading...
