Oki C650 - Page 220

Management of this machine
- 220 -
Item
Description
Security
Protocol ON/OFF
Stops network protocols and network services that you do not use.
IP Filtering Restricts access by TCP/IP. Controls access from outside the company.
However, this function requires knowledge about the IP address. This
machine may be denied from access to network due to serious
problems depending on settings.
MAC Address Filtering Restricts access by the MAC address. Controls access from outside the
company. However, this function requires knowledge about the MAC
address. This machine may be denied from access to network due to
serious problems depending on settings.
SSL/TLS
Encrypts communication between this machine and your PC (client).
IPSec Sets the encryption and tampering of communication between this
machine and your PC (client).
WebPage Authentication
Method
Sets the web page authentication method.
Maintenance Reset/Restore Initializes or resets the network card. If it is reset, the web page will not
be displayed even if you access from the web browser until you have
reset. If it is initialized, the IP address will be reset to the initial state,
and the information set manually will be lost. In that case, you will not
be able to view the web page.
Network Scale This setting is to operate more efficiently on the network. When using a
hub with a spanning tree function, this function is effective when the PC
and this machine are connected on a one-to-one basis with a crossover
cable.
Print From USB Memory Setup
Sets printing from the USB memory.
Item
Description
Default Settings
Sets the default value for printing from the USB memory.
Barcode Print Setup
Sets the initial value for printing barcodes.
Print Setup
Item
Description
Print Menu Print Setup Sets the number of copies, etc. Upon using the printer driver, the setup
in the printer driver will take priority over this setting value.
Printer Adjust
Sets the printer adjustment such as manual timeout and jam recovery.
Print Position Adjust Adjusts the print position such as X Adjust, Y Adjust, Duplex X Adjust,
and Duplex Y Adjust.
Drum Cleaning
Sets the image drum cleaning.
Hex Dump Displays all received print data in hexadecimal. This mode exits when
this machine is restarted.
Color Menu
Sets the information about color.
System Configuration Menu Sets various types of actions of this machine in correspondence to
various situations such as personality and alarm release.
Emulation
PCL Setup
Sets the information about PCL.
PS Setup
Sets the information about PS.
IBM 5577 Setup
Sets the information about IBM 5577.