Management of this machine
- 221 -
Private Job
Setup
Verify job option Specifies whether to verify the print data before printing.
If enabled, printing is performed after verifying that the print data has
not been changed. The integrity of print data is guaranteed, but the time
to start printing will be longer.
Erase job option Sets the method for erasing the print data.
Specifies that the data cannot be overwritten after it has been erased
and cannot be restored.
If you overwrite, it will take longer to erase.
Value range: No overwrite/Zero out once
Keep job for Sets the retention period of the print data.
After the print data is saved, if the print data is not printed after the set
period, the print data is automatically deleted.
Value range: 15 min/30 min/1 hour/2 hours/4 hours/8 hours/12 hours/1
day/2 days/3 days/4 days/5 days/6 days/7 days
Job Limitation Sets whether to save restricted print data.
When [Private Print only] is selected, print data other than private print
Verify job password Selects whether to verify the job password when the access control is
Job Auto Search Selects whether to perform job search at the same time as unlocking
the panel when the access control is enabled.
Management
Sets the information about this machine.
Sets the information about USB.
Sets the access control function.
System Setup Sets various types of actions of this machine in correspondence to
various situations such as unit of measurement and alarm release.
Sets power save, sleep and auto power off.
Sets the items to be displayed on the screen.
Buzzer Setup Adjusts the volume when an error occurs, when the printing has
completed, when AirPrint is checked, and when the IC card is held up (if
the IC card reader is installed).
Used to initialize the flash memory and format a partition.
Sets whether to save the job log. Also used to clear saved job logs.
Sets the actions when «CANCEL» is pressed.
Language
Maintenance
Select Language Sets the language for the screen display, the web page display and the
report printing.
Sets the information about the font output mode.
Paper Feed Roller Counter Clear
Clears the counter after the paper feed roller is replaced.
Save the data set in "Setting", and initialize the recalling.
Settings Cloning
Transmits settings of this machine which are saved and filed to the PC.
File and save the settings of this machine to a PC.
Enables or disables the counter of maintenance parts.
User Install
Item Description
Sets the configurations checked over the network.
Sets the information about SNTP.
To Next Page
Loading...
