Management of this machine
- 235 -
This function is not available if you log in using any method other than local authentication.
This function is not available when "Register general user's IC card" is set to [Disable] by the administrator.
Enabling access control(P.230)
1
Log into this machine using the local authentication method.
Logging into this machine(P.231)
2
Press the scroll button ▼ on the operator panel several times to select [User Account Info], and
press «OK».
3
Press ▼ several times to select [Register IC card], and press «OK».
4
Register the IC card information by following on-screen instructions.
To Next Page
Loading...
