Oki C650 - Page 376

Troubleshooting
- 376 -
Symptom
Cause
Solution
Reference
Printing stops in
between.
The temperature is
adjusted because the
temperature inside this
machine has risen due
to long-time
continuous printing.
Please wait.
The printing will automatically start again once
the temperature of this machine returns
appropriate.
-
The memory is
insufficient.
The memory of this
machine is insufficient
as the print data is too
big.
Print again after reducing the resolution in the
printer driver.
-
All pages are not
printed.
The WSD port is used. Change the print destination port to the
standard TCP/IP port.
-
Printing, printer search
or setup is not
available in the sleep
mode.
The NBT/WINS
protocol is suppressed
in the sleep mode.
Press the scroll buttons on the operator panel
to select [Specific] from [Admin Setup] - [USB
Setup] - [Connected Host].
-
Periodic email alerts
are not notified in the
sleep mode.
Periodic email alerts
notification is
suppressed in the
sleep mode.
Press the scroll buttons on the operator panel
to select [Specific] from [Admin Setup] - [USB
Setup] - [Connected Host].
-
The time and date
settings of this
machine may be
shifted if acquired from
the server.
The time update
function with the SNTP
server is suppressed
in the sleep mode.
Press the scroll buttons on the operator panel
to select [Specific] from [Admin Setup] - [USB
Setup] - [Connected Host].
-
Printing is slow. Printing is also
performed on the PC
side.
Use a PC with a fast processing speed. -
In [Print Options] tab
of the printer driver,
[Extra Fine (Multi-
Tone)] or [Fine
(1200x1200dpi)] is
selected.
Select [Normal (600x600dpi)] in the
[Preferences] or [Print Options] tab of the
printer driver.
-
The print data is
complicated.
Select simple print data. -
Narrow paper (less
than 216 mm) is used.
Press the scroll buttons on the operator panel
to select [Menus] - [Print Adjust] - [Narrow
Paper Speed], and change the setting.
-
When moisture control
is set to [Mode1] or
[Mode2], it may take
more time to print and
output the first page.
Press the scroll buttons on the operator panel
to select [Off] in [Menus] - [Print Adjust] -
[Moisture Control].
-
Display of the printer
driver is abnormal.
The printer driver may
not work correctly.
Delete and reinstall the printer driver. Deleting
software(P.322)
Installing
software(P.246)