Connecting to the PC after preparing the device
- 50 -
5
Press ▼ several times to select [Wireless Network Selection], and press «OK».
Start searching for wireless LAN access points. Please wait.
6
A list of SSID of connectible wireless LAN access points is displayed. Press ▼ several times to
select [Manual Setup] at the end of the list, and press «OK».
7
Check that [SSID] is selected, and press «OK».
8
Input the SSID recorded in Step 1, and press «OK».
9
Press ▼ to select [Security], and press «OK».
10
Select the encryption method recorded in Step 1, and press «OK».
11
Press ▼ to select [WPA Pre-shared Key], and press «OK».
To Next Page
Loading...
