- 117 -
4. Print
For Mac OS X
1
Open the file to print.
2
Select [Print] from the [File] menu.
3
Select [Letter] or [A4] from [Paper Size] and select the orientation from
[Orientation].
4
Select [Multi-Purpose Tray] for [All Pages From] on the [Paper Feed] panel.
5
Change other settings if necessary, and then click [Print].
If setting details are not displayed in the print dialog box, click [Show Details] at the bottom of the dialog box.
• Loading Long Paper
• For Windows PCL Printer Driver
• For Windows PS Printer Driver
•For MacOSX
Set a paper size for the MP tray on the touch panel. Then, register a paper size with a printer
driver.
• Register the paper size so that the length is longer than the width. You cannot set the length that is shorter than the
width.
• This function may not be available for some applications.
• If the paper length exceeds 356 mm, the print quality may not be guaranteed even if the paper is used under the
recommended conditions.
Loading Long Paper
When printing on long paper, change the paper type setting, and use the MP tray and rear
output tray.
1
Load paper in the MP tray.
2
Open the rear output tray.
3
Press [Device Settings] on the touch panel.
4
Press [Paper Setup].
5
Press [MP Tray].
6
Press [Paper Size].
7
Select [Custom].
8
Press [Custom] to set a paper size within the following range, and then click
[OK].
•
Width: 64 to 216 mm
•
Length: 90 to 1321 mm
Printing on Long Paper
To Next Page
Loading...
Need help?
General
