Oki MC573 - Setting a Print Method for When a Received Image Exceeds Paper Size

- 211 -
5. Fax
• Use only plain or recycled paper.
• Available paper sizes are A4, A5, B5, Letter, Legal 13, Legal 13.5, Legal 14, Statement, Folio.
Paper Size Priority
• If a received fax is larger than a specified paper size, the fax is reduced, discarded, or printed onto multiple sheets
of paper depending on the reception print settings.
Setting a Print Method for When a Received Image Exceeds Paper Size
• Specifying a Reduction Ratio
• Specifying a Threshold Value
The excess from the specified paper is reduced or discarded, or printed on the next sheet of
paper. For example, if the machine receives a fax that is larger than A4 with A4 paper
specified, the excess of the image is printed on the next sheet of paper.
You can avoid such situation by specifying a reduction ratio.
Specifying a Reduction Ratio
The reduction rate determines whether or not the machine automatically reduces the
received image to the specified paper size. [Auto] automatically reduces the image and
[100%] prints the image without reduction. [Rx Reduc. Rate] is set to [Auto] by factory
default.
1
Press [Device Settings] on the touch panel.
2
Press or several times and press [Admin Setup].
3
Enter the administrator name and password and press [OK].
The factory default administrator name and password are "admin" and "999999"
respectively.
4
Press [Fax Setup].
5
Press [Other Settings].
6
Press [Rx Reduc. Rate].
Basis Available Paper Size for Printing Received Fax
AB A4, A5, B5, Folio
Letter Letter, Legal 13/13.5/14, Statement
Setting a Print Method for When a Received Image Exceeds
Paper Size