Oki MC573 - Setting the Number of Redial Attempts and Redial Intervals

- 202 -
5. Fax
If the fax transmission fails, the machine automatically redials. If the recipient's line is busy,
the recipient's machine does not answer, or a communication error occurs, the sender's
machine also automatically redials. You can set the number of redial attempts and the
intervals of redial attempts.
1
Press [Device Settings] on the touch panel.
2
Press or several times and press [Admin Setup].
3
Enter the administrator name and password and press [OK].
The factory default administrator name and password are "admin" and "999999"
respectively.
4
Press [Fax Setup].
5
Press [Other Settings].
6
Press [Redial Tries].
7
Enter the number of redial tries.
8
Press [OK].
9
Press [Redial Interval].
10
Enter the redial interval.
11
Press [OK].
12
Press [Back] until the home screen is displayed.
If the transmission failed a specified number of times for redial attempts, the document that is stored in memory is
erased and an error message is printed out.
Specifying a Destination from Transmission History and Reception History
Setting the Number of Redial Attempts and Redial Intervals