- 326 -
9. Operating Management/ Specifications
• Default Settings
• Configure Shortcuts
• Fcode Box
• Security Function
Fax Setup
Item Factory
default
setting
Description
Resolution Normal Sets the default image quality.
Background Removal Auto Sets the default setting of the background
removal.
Density 0 Sets the default density to scan.
Scan Size A4 or Letter Sets the default scan size.
Continuous Scan(Glass) OFF Sets whether to use Continuous Scan.
Continuous Scan(ADF) OFF
Preview OFF Sets the preview image of sending image.
Edge Erase Setting OFF Sets whether to erase the edge shadow
created on Fax scan image.
Width 2 mm (0.1 inch) Sets an erasing width created on Fax scan
image.
TTI ON Sets whether to add the sender's name to the
header of the sent fax by default.
Transmit Confirmation Report OFF or ON Sets whether to automatically print
transmission results by default.
Memory Tx ON Sets whether to use memory transmission
(ON) or real-time transmission (OFF) by
default.
Item Factory
default
setting
Description
Configure Shortcuts 01: Manual Dial
02: Speed Dial
03: Group List
04: Redial
05: Off Hook
06: Resolution
Sets the shortcut button for the [Fax] tab.
Item Factory
default
setting
Description
Edit / Register Confidential
Box
Box Name (NULL) Sets the name for confidential boxes. You
can enter up to 16 characters.
Sub-Address (NULL) Sets the sub-address for confidential box.
You can enter up to 20 characters.
Hold Time 0 Sets the hold time for confidential box.
Available range: 0 to 31 days
I.D.Code (NULL) Sets the password for confidential box.
Register a 4-digit numerical number only.
Bulletin Box Box Name (NULL) Sets a bulletin box name. You can enter up to
16 characters.
Sub-Address (NULL) Sets the sub-address for bulletin box. You
can enter up to 20 characters.
Delete Deletes an Fcode box.
Item Factory
default
setting
Description
ID Check Tx OFF Sets whether to use the ID check
transmission.
Broadcast Destination ON Sets whether to indicate the transmission
destination number before starting broadcast
transmission.
Confirm Dial OFF Sets whether to reenter the transmission
destination fax number before sending a fax.
Manual Input Enable Sets permission of manual input.
Secure Receive Setting OFF Sets whether to store a received fax in the
memory of this machine without printing
immediately.
Password (NULL) Sets the password that is entered when
printing a received fax image that is stored in
the memory of this machine.
Delete after
printing
Yes Sets whether to delete a fax image after
printing.
To Next Page
Loading...
Need help?
General
