Oki MC573 - Specifying a Destination Using One-Touch Button

- 85 -
3. Scan
9
Press the (START) button.
1
Press [Scan] on the touch panel or (Scan) on the operator panel.
2
Set a document in the ADF or on the document glass.
3
Press [Scan To E-mail].
4
Set scan settings if necessary.
5
Press [OK].
To select the speed dial numbers 09 to 40 that are assigned to one-touch buttons,
press or to switch between the screens.
6
Press the (START) button.
Specifying a Destination Using One-touch Button