Oki MC573 - Setting a Shortcut Button of each Function

- 12 -
1. Basic Operations
The number of shortcut buttons that can be set varies depending on the function.
1
Press [Device Settings] on the touch panel.
2
Press or several times and press [Admin Setup].
3
Enter the administrator name and password and press [OK].
The factory default administrator name and password are "admin" and "999999"
respectively.
4
Follow the procedure in the table below.
5
Press the button whose setting you want to change.
6
Select a function to register.
Each shortcut button registered cannot be deleted. It can be replaced by a different shortcut button.
7
Press [OK].
Setting a Shortcut Button of Each Function
Functions whose settings you want
to change
Display on the touch panel and operation procedures
Copy Press [Copy Setup] > [Configure Shortcuts].
Scan To E-mail Press [Scanner Setup] > [E-mail Setup] > [Configure Shortcuts].
Scan To Shared Folder Press [Scanner Setup] > [Shared Folder Setup] > [Configure
Shortcuts].
Fax Sending Press [Fax Setup] > [Configure Shortcuts].
Internet Fax Sending Press [Internet Fax Setup] > [Configure Shortcuts].
Scanning to Fax Server Press [FaxServer Function] > [Configure Shortcuts].