Oki MC573 - Page 27

- 27 -
1. Basic Operations
2
Change a setting value to register.
3
Press [Job Macro] on the touch panel.
The Job Macro list screen also appears if [Register to Job Macro] is pressed in the following operation procedure.
In this case, proceed to step 5.
4
Press [Register] in the Job Macro list screen.
Function Display on the touch panel and operation procedures
Copy [Basic] tab > [Register to Job Macro]
Scan To E-mail [Basic] tab > [Register to Job Macro]
Scan To USB Memory [Scan To USB Memory] tab > [Register to Job Macro]
Scan To Shared Folder [Basic] tab > [Register to Job Macro]
Print from USB Memory [Register to Job Macro]
Fax Sending [Basic] tab > [Register to Job Macro]
Internet Fax Sending [Basic] tab > [Register to Job Macro]
Scanning to Fax Server [Basic] tab > [Register to Job Macro]