- 337 -
9. Operating Management/ Specifications
EPSON FX Setup
Private Print Setup
Text Height Same Sets the height of a character.
SAME: The height stays the same
regardless of CPI.
DIFF: The height varies according to
CPI.
Item Factory default setting Description
Character Pitch 10 CPI Specifies character pitches.
Character Set SET-2 Specifies a character set.
Symbol Set IBM-437 Specifies a symbol set.
Letter O Style Disable Specifies the style that replaces 9BH
with letter o and 9DH with a zero.
Zero Character Normal Sets the zero to be slashed or
unslashed.
Line Pitch 6 LPI Specifies the line spacing.
White Page Skip OFF Selects whether to print blank pages.
CR Function CR Select a carriage return from [CR] or
[CR+LF].
Line Length 80 Column Specifies the number of characters
per line.
Form Length 11.7 inch or 11 inch Specifies the length of paper.
TOF Position 0.0 inch Specifies the distance from the top
edge of paper to where the cut is to be
made.
Left Margin 0.0 inch Specifies the distance from the left
edge of paper to where the cut is to be
made.
Fit To Letter Disable or Enable Sets the printing mode that can fit
paper to the printable area equivalent
to 11 inches (66 lines).
Text Height Same Sets the height of a character.
SAME: The height stays the same
regardless of CPI.
DIFF: The height varies according to
CPI.
Item Factory default setting Description
Item Factory default setting Description
Verify job option Disable Set whether to verify a job before
printing.
If enabled, the machine verifies that
the job is not altered before starting
printing. The security is enhanced,
however it will take longer to start
printing.
Erase job option No overwrite Set how to delete a job.
You can overwrite deleted data so that
it will not be restored.
If enabled, it will take longer to delete.
Available value: No overwrite/Zero out
once
Keep job for 2 hours Set the storage period of jobs.
If the set period elapses after jobs are
stored, the jobs will be automatically
deleted.
Available value:
15 minutes/30 minutes/1 hour/
2 hours/4 hours/8 hours/12 hours/1
day/2 days/3 days/4 days/5 days/6
days/7 days
Job Limitation Disable Sets whether to save a restricted print
job.
If [Private Print Only] is selected, print
jobs other than private print are not
accepted.
Job Password Authentication OFF Sets whether to verify a job password
when the access control is enabled.
To Next Page
Loading...
Need help?
General
