- 361 -
9. Operating Management/ Specifications
5
Enable the access control in [STEP1.Set access limits], and then click
[Submit].
When the access control is enabled, the login screen appears on the touch panel.
6
Enable [Quota Management] in [STEP2. Quota Management Settings], and
then click [Submit].
The quota management means managing amount of usage.
7
Set each item following the on-screen instructions, and then click [Submit].
•
Limited Format Setting: Set an action when your points are insufficient.
•
Display Time of The "Insufficient Balance" Error: When you do not have enough
points to perform the job, the error screen appears on the operator panel. Set the
period of time for displaying the error screen.
•
Point Calculation Type: Specify calculation type used for printing. For [Simple],
setting is available on the Web page of the machine and for [Standard], setting is not
available on the Web page.
To Next Page
Loading...
