Omron CJ2 CPU UNIT SOFTWARE User Manual

10-33
10 CPU Unit Functions
CJ2 CPU Unit Software User’s Manual
10-3 Startup Settings and
Maintenance
10
10-3-5 Automatic Transfer at Startup
If the contents of the AUTOEXEC.IOM and ATEXECDM.IOM files overlap, the ATEXECDM.IOM file will
be given priority in writing. (This is because the files are loaded in the following order: AUTOEXEC.IOM
and then ATEXECDM.IOM.)
Additional Information
Automatic transfer at startup and replacing the entire program using the Auxiliary Area control
bits can be used in combination. It is possible to replace the program with another program using
automatic transfer at startup, and then use an Auxiliary Area control bit to replace the program
again during operation.
Data files, con-
tinued
AUTOEM@@ .IOM EM Area data
with bank
No.@@ (Con-
tains the speci-
fied number of
words of data
starting at
E@@_0.)
• Store the EM Area data for bank
No. @ starting at E@_0 in the file
named AUTOEM@@.IOM. (The
box refers to bank No. 0 to C. The
maximum bank number of banks
depends on the model of CPU
Unit.)
• At startup, all data from the start
of the file will be transferred start-
ing at E@_0. If there are not
enough words for the entire area,
the remaining words in the area
will not be changed.
• This file is not necessary to per-
form automatic transfer at star-
tup.
*2
---
File type File name
Exten-
sion
Contents Description Required?

Omron CJ2 CPU UNIT SOFTWARE Specifications

General

Brand	Omron
Model	CJ2 CPU UNIT SOFTWARE
Category	Software
Language	English