21
NV-Designer Window Names and Menus Section 3-2
PT Transfer Transfer Transfers the base screen data, NV Configuration data, and
other data created on the NV-Designer to the PT.
Verify Compares the file that is open on the NV-Designer and the
file transferred to an NV-series PT. If the contents differ, the
differences will be displayed. Compares files read to the NV-
Designer.
Create SD Memory
Card File
Names a file in the SD memory card and saves the base
screen data in it.
Read from SD Mem-
ory Card File
Reads base screen data from a file on the SD memory card.
NV Configuration Displays the NV Configuration Dialog Box.
Sets basic items, such as the PT’s system memory, parame-
ters for communications with PLCs and computers (NV-
Designer), PLC multiple connection, auto-paging, startup
screen settings, Setup 1 settings (clock, backlight, key press
sound, battery error display, file compression, system menu
language, switching display language, backlight brightness,
contrast adjustment), Setup 2 settings (SD memory card
menu), memory hold, recipes, alarm history, line graphs, and
operation security.
Recipes Specifies the first control address and creates the settings
for each model for the function that reads and writes the set-
tings for a model from and to the specified PLC address as
commanded by the PLC.
Flow displays Text messages can be displayed like an electric scoreboard
moving across the Flow Display Dialog Box from right to left.
Writing memory
(Write Address)
Used to set operations to set or reset bits, set values, per-
form calculations, etc. in PLC memory when conditions in
the PLC are met while the specified screen is displayed.
Password Displays the Edit Operation Security Password Dialog Box
so that you can set the passwords when the operation secu-
rity password function is being used.
Multi Language
Exchange String List
If the Switch Display Language Option is selected in the NV-
Designer Configuration, the language number and language
type can be selected. The character string for each lan-
guage number can also be edited in the list.
Screen Properties Used to set the properties of a base screen (i.e., the name,
background, and backlight operation).
Parts Open Parts Library Opens the Parts Library Selection Dialog Box. Select the
parts library to use and click the Open Button.
Edit Attributes Edits the selected parts.
Draw Used to edit screens of custom switch parts.
Parts List Displays the parts attributes used by a base screen in a list.
Menu Submenu/Command Description
To Next Page
Loading...
