Oracle X6-2-HA

14
Oracle Appliance Manager Command-Line
Interface for Virtualization
Oracle Appliance Manager Command-Line Interface (OAKCLI) is a command-line
interface (CLI) for Oracle VM Server (Xen hypervisor technology virtualization) on
Oracle Database Appliance virtualized platform. Only use the oakcli commands on an
Oracle Database Appliance virtualized platform.
• About the Oracle Appliance Manager Command-line Interface (OAKCLI)
The oakcli commands are the primary method for performing database and
system administration on Oracle Database Appliance, and on Oracle Database
Appliance Virtualized Platform.
• Managing OAKCLI Privileges and Security with SUDO
Oracle Appliance Manager command-line utility requires
root system privileges for
most administration actions. You may want to use SUDO as part of your system
auditing and security policy.
• oakcli add disk -local
Use the oakcli add disk -local command to add a local disk to the system
after physically replacing a failed disk.
• oakcli configure commands
Use the oakcli configure commands to configure components on Oracle
Database Appliance.
• oakcli copy
Use the oakcli copy command to prepare a copy of the configuration file for use
during the configuration of Oracle Database Appliance.
• oakcli create commands
Use the oakcli create commands to create components on Oracle Database
Appliance.
• oakcli delete commands
Use the oakcli delete commands to delete components from Oracle Database
Appliance.
• oakcli deploy
Use the command oakcli deploy to deploy Oracle Grid Infrastructure for a cluster
on Oracle Database Appliance.
• oakcli expand storage
Use the oakcli expand storage command to configure the solid-state drives
(SSDs) for data storage into the existing base configuration to fully populate the
base storage shelf.
• oakcli diskwritecache
Use the oakcli diskwritecache command to locate disks with write cache
enabled and to disable disk write cache for those disks.
14-1