Panasonic VF100 - P093: Detect Frequency [Output TR]; P094: Detect Frequency [Output RY]

P093：Detect frequency [output TR]
P094：Detect frequency [output RY]
Using open-collector output 1, 2 and relay output to set the detected frequency when frequency detect signal
is output.
[Parameter P094: Detect frequency (output RY)]
[Parameter P093: Detect frequency (output TR)]
Output frequency
Run signal (OFF)
Frequency detect signal
(OFF)
Setting frequency (±2Hz)
Detect frequency
P093 and P094
（ON）
（ON）
（OFF）
（OFF）
Arrival signal (OFF)
（OFF）
（OFF）
（ON）
（ON）
[Relationship between output frequency and each output signal]
0000・0.5 to 400.0Data setting range (Hz)
0000・0.5 to 400.0Data setting range (Hz)
・ The frequency is valid in open-collector output 1 and 2.
・ "0000" is 0V stop (0.0).
・ "0000" is 0V stop (0.0).
107
P090～P092
Related
parameters