P151：Setting data clear
The set data can be changed to the factory setting data in a batch.
Changes all data regardless of vector control to the factory settings.1
Changes all data to the factory settings.2
Changes function distribution in the custom mode to the distribution at factory setting.
3
Data value that indicates normal state.0
Details
Data setting
value
Note
・ Setting value is changed to the value other than "0". Press the SET button and when the
displayed value automatically changes to "0" after data changing, the change is completed.
*
*
Data related to vector control
"P134: Slip compensation frequency""P131: No. of motor poles"
"P133: Voltage compensation constant""P130: Motor capacity"
140
To Next Page
Loading...
