P095：Level of current detect
P096：Retardation time of current detect
Using open-collector output 1, 2 and relay output to set current detect level and retardation time
when current detect signal is output.
0.1 to 100.0Data setting range (A)
0.1 to 10.0Data setting range (s)
・ Retardation time of current detect signal is used to set retardation time of signal from OFF
to ON.
Retardation time of signal from OFF to ON is about 100ms (fixed).
[Parameter P095: Level of current detect]
[Parameter P095: Retardation time of current detect]
108
P090～P092
Related
parameters
To Next Page
Loading...
