Panasonic VF100 - 8 Control State Monitor; N001：Output Frequency; N002：Output Current;N003：Output Voltage;N004：Internal DC Voltage

The following 23 items can be monitored in the control state monitor mode.
－
－
－
－
－
－
－
%
%
%
－
－
－
－
－
－
times
－
Hz
VDC
VAC
A
Hz
Unit
Fourth to latest details of errors
Third to latest details of errors
Second to latest details of errors
Latest details of errors
Accumulative operation time of the
inverter's fan
Accumulative operation time of the inverter
Progress of automatic tuning under PID
control
Setting value under PID control (MV)
Setting value under PID control (PV)
Setting value under PID control (SP)
Function state of control circuit terminals
in the inverter
Operation control state of the inverter
Operation state of the inverter
Output signal state of control circuit terminals
Input signal state of control circuit terminals
Indication of alarm LED
Continuous times during a cycle when
the timer is in operation.
Communication station No. set currently
Setting frequency
Internal DC voltage
Output voltage
Output current
Output frequency
Indication
Reference
page
Accumulative fan
operation time
n019
Fault display (latest)n020
Fault display
(second to latest)
n021
Fault display
(third to latest)
n022
Fault display
(fourth to latest)
n023
Accumulative operation
time
n018
Progress of automatic
tuning
n017
PID output value (MV)n016
PID target value (PV)n015
PID setting value (SP)n014
Terminal function state
monitor
n013
Operation control state
monitor
n012
Operation state monitorn011
Control terminal state
(output signal)
n010
Control terminal state
(input signal)
n009
Alarm typen008
Timer runtimes n 007
Communication station No.n006
Setting frequencyn005
Internal DC voltagen004
Output voltagen003
Output currentn002
Output frequencyn001
Monitor item
Monitor
No.
n001：Output frequency
Indicates the output frequency of the inverter. "0.0" is displayed when the inverter is stopped.
n002：Output current
n003：Output voltage
n004：Internal DC voltage
The indications of the output current, output voltage and internal DC voltage are not the accurate
indications for measuring. Use those indications to get rough values.
(If you need the accurate values, use a measuring instrument.)
46
8. Control State Monitor
46
46
46
46
47
47
47
47
48
48
49
50
51
52
52
52
52
52
52
52
52
52
52