P146：Line speed multiplier
Used to set the multiplier in relation to output frequency when setting data value is displayed as "1"
line speed in "P145: Operation status monitor".
[Parameter P146: Line speed multiplier]
[Setting example] Display line speed
Line speed (m/min) ＝ F (Hz) ×K (multiplier)
・ To display the line speed 25 (m/min) for 50Hz, set the multiplier (K) to "0.5".
・ A line speed exceeding "9999" is displayed as "9.9.9.9".
0.1 to 100.0 Data setting range
Note
137
P145
Related
parameters
To Next Page
Loading...
