Panasonic VF100 - Example for Rotating in Forward Direction at Operating Frequency 25 Hz; Operating with the Operation Panel - 2

・Forward /reverse run function: Forward / reverse run (Parameter P003=1)
・Frequency setting : Potentiometer setting (Parameter P004=0)
Example for rotating in forward direction at operating frequency 25Hz
The main display lamp will turn ON.
(Operation status display mode)
Press the RUN button.
The run state will be entered, but
as the frequency setting dial is
set to Min., the OV stop state will
be entered.
Gradually turn the frequency setting
dial clockwise, and then motor will
start to run. When "25.0" is displayed,
the motor is operating at 25Hz.
Power ON
Operating frequency is set to 50Hz.
Forward
run setting
Frequency
setting
Press the UP button to set rotation
direction.
(Press the DOWN button to set
reverse run.)
Run command
Turn the frequency setting dial
clockwise to MAX. position, and
rotation speed of the motor will
increase. When "50.0" is displayed
on the main display, the motor
is operating at 50Hz.
Changing
the frequency
Stopping operation
Press the STOP button.
The motor will start to decelerate
and will stop.
Stop command
31
7-3.2 Operating with the Operation Panel - 2
RUN
STOP