1. Points for Handling
2. Special Precautions
3. Installation
4. Outline Dimensions
5. Parts Identification
5-1. Part Name
5-2. Details on Part Number
5-3. Removal and Installation of Terminal Cover
5-4. Removal and Installation of Operation Panel
5-5. Explanation of Operation Panel
6. Wiring
6-1. Wiring (Main Circuit)
6-2. Wiring( Control Circuit)
7. Operation( Basic Operation)
7-1. Setting the Frequency with the Operation Panel
7-2. Setting Forward/Reverse Run Operation with
the Operation Panel
7-3. Operating with the Operation Panel
7-3.1 Operating with the Operation Panel -1
(Factory Setting State)
7-3.2 Operating with the Operation Panel -2
7-3.3 Operating with the Operation Panel -3
7-3.4 Operating with the Operation Panel -4
7-4. Operation Modes
8. Control State Monitor
9. Function Parameters
9-1. Setting and Changing Function Parameters
9-1.1 Setting and Changing Function Parameters
When operation is stopped
9-1.2 Setting and Changing Function Parameters
during Operation
Contents
6
9
10
12
13
14
14
15
16
17
19
20
20
22
26
27
27
28
29
31
34
38
41
46
53
53
53
55
To Next Page
Loading...
