Panasonic VF100 - Terminal Input of Multifunction Terminals

12-9.3 Terminal Input of Multifunction Terminals
・ Command sent by the medium of communication cannot be performed occasionally according
to function settings for multifunction terminals.
Dedicated function of terminal inputpulse counter input function
Dedicated function of terminal inputFrequency▲(UP) setting function
Dedicated function of terminal input Frequency(DOWN) setting function
Dedicated function of terminal input3-wire stop command function
Terminal input and communication command can be
used simultaneously.
Coast-to-stop function
Dedicated function of terminal input (Please use DT255.)External fault stop function
Dedicated function of terminal inputJOG function
Terminal input and communication command can be
used simultaneously.
Reset lock function
Dedicated function of terminal input PWM frequency signal select function
Terminal input and communication command can be
used simultaneously. *1
PID function changeover function
Terminal input and communication command can be
used simultaneously. *1
2
nd
characteristics select function
Terminal input and communication command can be
used simultaneously. *1
Frequency signal changeover function
Dedicated function of terminal input
(Please use DT253.)
Reset input function
Terminal input and communication command can be
used simultaneously.
Parameter setting disabled function
Terminal input and communication command can be
used simultaneously. *1
Multi speed function
NameRelay No.
*1 indicates command and terminal input sent by the medium of communication are invalid
during timer's operation.
188