Parker AC30 - Page 170

12-5 Ethernet
AC30 series Variable Speed Inverters
Using Both DHCP and Auto-IP
Parameter
Setting
0929 DHCP
TRUE
0930 Auto IP
TRUE
If both the DHCP and Auto-IP are enabled then an IP address will be obtained automatically depending on the network. This is the default
setting.
The inverter will take a link-local address in the range 169.254.*.* if no DHCP server is discovered on the network. If a DHCP server is available
(or becomes subsequently available) then the inverter will take the IP address from the server. Note that the DHCP has precedence.