Parker AC30 - Page 205

Modbus TCP A-10
AC30 series Variable Speed Inverter
0942
Modbus Trip Enable
Type: BOOL
Default: FALSE
Base Communications Modbus TCP parameter.
Set TRUE to enable the Modbus Trip. The parameter Modbus Timeout must be set to a value other than zero
Range
Writable
Saved
Config
FALSE
TRUE



1241
Open Connections
Type: USINT
Base Communications Modbus TCP parameter.
Indicates the number of open connections to the inverter Modbus TCP server.
Range
Writable
Saved
Config
0
…
3



0943
Process Active
Type: BOOL
Base Communications Modbus TCP parameter.
Indicates that a Modbus request addressed to this node has been received within the period set by the parameter Modbus Timeout, or
if no timeout is specified, this parameter will stay active after the first received Modbus request.
Range
Writable
Saved
Config
FALSE
TRUE


